CBM America CBM-720, CBM-710, CBM-750, CBM-730 manual Input Data Formats, Enlarged character command

CBM-710/720/730/750 User ’s Manual

11.2 Input Data Formats

(1) Paper feed command for "n" lines
	D8							D1
1st byte	0	0	0	0	1	1	0	0

FF (0C)H + n

2nd byte

D8							D1
	N7	N6	N5	N4	N3	N2	N1

N7 ~ N1 (Binary digits)

When the number of lines to be fed (2hd byte) is written-in following the paper feed command (1st byte), the paper will be fed by the number of lines specified. The number of lines to be fed can be specified from n=1 to 127. If "0" is specified, paper feed will not be carried out. When there is data in the print buffer at the time this co mmand is applied, this data will first to printed out and then line feeding of "n" lines will be performed.

(2) Enlarged character command

D8							D1
0	0	0	0	1	1	1	0

SO (0E)H

The data following this command, are printed out in twice the normal width. This mode will continue until the corresponding cancel command is input, or automatically released after printing one line. Since enlarged characters are twice the normal width, care should be taken to avoid exceeding the column capacity.

36 CITIZEN