— 16 —
1
Turn off the power of the printer.
2
Open the printer cover.
3
Fit the partition supplied into the
position shown.
4
Refer to “5. SETTING DIP
SWITCHES”, change a DIP switch to
the setting for using 58 mm wide
paper rolls.
4.6 Using 58 mm Wide Paper Rolls
Partition
1
Turn off the power of the printer.
2
Open the printer cover.
3
Remove the paper jam including any
paper chips remaining. (Also take
out the paper roll from the holder.)
4
Close the printer cover.
5
Turn on the printer. The auto cutter
mechanism is initialized and the
alarm is cleared.
4.7 Removing Paper Jams
CAUTION:
The print head has become hot immediately after printing is finished. Avoid touching it
with your hand. Do not touch the heating element of the head with a bare hand or
metal object either.