CDA 4Q4 manual It is very important to check that

CORRECT POSITIONING OF THE AUXILIARY, SEMIRAPID AND RAPID BURNERS

✓ It is very important to check that the	Figure 12
burner flame spreader “F” and the
cap “C” have been correctly posi-
tioned (see figs. 11 and 12). They
shall be level and must not rotate.

Failure to do so can cause serious problems.

✓ The pan supports shall be correctly positioned as indicated in fig. 13. The pan supports shall be level and must not rotate.

Models with triple-ring burner: be sure not to fit the triple-ring burner pan support on the auxiliary, semi- rapid or rapid burners. The triple-ring burner pan support IS ONLY to be used on the triple-ring burner.

Figure 11

	C
	F
Ignitor "S"	Flame failure
16	probe "T"

Figure 13