CDA 4Q4 manual Ignitor S Flame failure probe T

MODELS WITH TRIPLE RING BURNER -

CORRECT POSITIONING OF THE TRIPLE RING BURNER

The triple ring burner must be correctly	Figure 16
positioned (see fig. 14); the burner ribs
must be fitted in their housing as
shown by the arrow.

The burner correctly positioned must not rotate (fig. 15).

Then position the cap “A” and the ring “B” (figs. 15 - 16). They shall be level.

✓The pan support shall be correctly

positioned as indicated in fig. 17. The pan support shall be level and must not rotate.

Be sure not to fit the auxiliary, semi- rapid or rapid burner pan support on the triple-ring burner. The auxiliary, semirapid or rapid burner pan sup- port IS ONLY to be used on the auxil- iary, semirapid or rapid burners.

Figure 14

Figure 17

Ignitor "S"

Flame failure probe "T"

Figure 15

A B

17