CDA DV 710 manual To Build in the Double Oven, Installation C by Using Housing Unit figs

Models: DV 710

1 36
Download 36 pages 35.9 Kb
Page 26
Image 26
To Build in the Double Oven

26

To Build in the Double Oven

The appliance should be installed by a QUALIFIED INSTALLATION TECHNICIAN. The appliance must be installed in compliance with regulations in force.

The built under double oven shall be fitted under the working surface into a kitchen base unit (width and depth 60 cm) but you must ensure that it is properly ventilated.

Installation requires a compartment as illustrated and described in next chapters:

Installation "A" between Existing Side Cabinets (560 or 600 mm GAP) (figs. 24, 25, 26, 28)

Installation "B" between Side Cabinets by Removing Provious Housing (figs. 27, 28)

Installation "C" by Using Housing Unit (figs. 29, 30, 31)

CAUTION: Do not lift the double oven by the door handles.

WARNING !

We would point out that the adhesive which bonds the plastic laminate to the furniture must withstand temperatures not less than 150° C to avoid delamination.

The appliance must be housed in heat resistant units.

The walls of the units must be capable of resisting temperatures of 75° C above room temperature.

Page 26
Image 26
CDA DV 710 manual To Build in the Double Oven, Installation C by Using Housing Unit figs