CDA DV 710 manual Installation C By Using Housing Unit figs. 29

Models: DV 710

1 36
Download 36 pages 35.9 Kb
Page 29
Image 29
Installation "C" By Using Housing Unit (figs. 29, 30, 31)

29

Installation "C" By Using Housing Unit (figs. 29, 30, 31)

Remove the single oven shelf, if fitted, as indicated in figure 29.

Remove the upper cross member support as indicated in figure 30.

Cut the bottom of the housing as indicated in figure 30.

Screw oven base housing to adjoining cabinetry by suitable screws (not supplied) as indicated in figure 31.

Check the position of the cabinet legs to ensure the cut-out does not interfere with the legs support.

Otherwise the cabinet may have to be removed as in INSTALLATION TYPE "B".

Mount the 2 (two) metal supports “B” (supplied with the appliance in a separate kit) as indicated in Figs. 31).

Build in the double oven making it slide on the metal supports “B”.

Page 29
Image 29
CDA DV 710 manual Installation C By Using Housing Unit figs. 29