CDA EVCK4 manual Mounting your extractor

Mounting your extractor

9.Assemble the ventilation duct(H), as shown in the diagrams below dependanyt on whether you are extracting air to the outside (Fig 12) or re-circulating (Fig 13), in which case you will need to purchase an optional accessory T-piece(M) from CDA. Ensure that the duct adapter (F) is securely connected to the duct pipe or T-piece in order to minimise noise.

10.Separate the two decorative sections and mount the upper section(Y) into position, then fix it to the frame with the 2 supplied screws(X).

11.Carefully slide the lower section (L) over the upper section (Y) and secure into position using the 4 machine screws (A) as shown in Fig 15.

Fig. 14

Fig. 12

Fig. 13

Fig. 15

9