Electrical Section
IMPORTANT: Installation must be carried out according to the manu- facturer's instructions. Incorrect installation may cause harm and damage to people, animals or prop- erty, for which the manufacturer accepts no responsibility.
DETAILS
✓Connection to the electric power sup- ply must be carried out by a qualified technician and following the appro- priate safety regulations;
✓Before carrying out the connection to the power supply, the voltage rating of the appliance (stamped on the appliance identification plate) must be checked for correspondence to the available mains supply voltage, and the mains electric wiring should be capable of handling the appli- ance’s power rating (also indicated on the identification plate);
✓If the hob is supplied without plug, fit a standard plug which is suitable for the power absorbed by the appliance and in conformity with the local rules in force.
✓The plug must be put into a socket connected to the earth system in compliance with safety rules.
✓This appliance can be connected directly to the mains, using fixed wiring via a DOUBLE POLE SWITCHED FUSED SPUR OUTLET (13 amps. fuse).
✓As the colours of the wires in the mains lead for the appliance, may not correspond with the coloured mark- ings identifying the terminals in your spur box, proceed as follows:
1)The wire which is coloured green and yellow must be connected to the ter- minal marked E (Earth) or coloured Green.
2)The wire which is coloured blue must be connected to the terminal marked N (Neutral), or coloured Black.
3)The wire which is coloured brown must be connected to the terminal marked L (Live), or coloured Red.
✓The power supply cord must not touch against any hot surfaces and must be placed so that its tempera- ture does not exceed 75°C at any point along its length.
✓After having installed the appliance, the power switch or power plug must always be in a accessible posi- tion.
N.B. For connections to the mains power supply, never use adaptors, reductions or multiple power points as these may overheat and catch fire.
In the event that installation should require modifications to the mains sup- ply wiring system, it is recommended that a qualified technician be called to carry out substitution.
The technician will also have to verify that the
If the hob surface is cracked dis- connect the appliance from the mains.
10