Installation Instruction
TECHNICAL INFORMATION FOR THE INSTALLER
Before installing the cooktop, remove the protective film.
This cooktop can be built into a working surface 30 to 40 mm thick and 600 mm deep.
In order to install the ceramic griddle into the kitchen fixture, a hole with the dimensions shown in fig. 3 has to be made, keeping in considera- tion the following:
✓within the fixture, between the bottom side of the ceramic griddle and the upper surface of any other appliance or internal shelf there must be a clearance of at least 30 mm;
✓the ceramic griddle must be kept no less than 300 mm away from any side wall;
✓the rear wall must be at least 50 mm from the ceramic griddle and must withstand a temperature of 150°C.
✓there must be a distance of at least 650 mm between the hob and any wall cupboard or extractor hood positioned immediately above (see fig. 4)
✓the coatings of the walls of the unit or appliances near the cooktop must be heat resistant (“X” protection against heating in compliance with standards EN
✓Do not instal the appliance near inflammable materials (eg. curtains).
Figure 3
288
50
490 | + | 0 |
| – | |
| 2 |
Figure 4
450 mm | 650 mm |
300 | mm |
|
510
| 0 |
| + 2 |
270 | – |
|
8