Fitting the Hob

Unpacking the hob:

Take care not to lose or mishandle any parts.

Fitting position of the hob:

This appliance must be installed a minimum of 50mm from any back wall and a minimum of 180mm away from any adjacent vertical surfaces, e.g. a tall cupboard end panel. This may be reduced to 100mm if the adjacent surface is resistant to fire (tiles or steel, for example). These dimensions are shown in Fig.6.

Ventilation requirements:

This appliance must be installed to allow air to flow freely to the air intake (A in figure 3) and from the air outlet (B in figure 3). Failure to allow sufficient ventilation could cause damage to the hob and constitutes incorrect installation, which is not covered by the warranty.

If fitting a cooker hood above the hob:

If a cooker hood is to be installed above the hob, the height of the hood above the hob must be at least 600mm (650mm is recommended) (Fig.5). If the instructions supplied with the hood dictate that the hood must be installed at a height greater than 600mm, then that height is the minimum required.

Wall furniture requirements:

The minimum height of any cabinet immediately above the hob is 900mm. The minimum height of any adjacent units (includ- ing light pelmets) is 400mm, unless they are manufactured from a material resistant to fire (steel, for example)

Notes:

•Do not position this appliance above a refrigeration unit. The heat generated may cause the refrigeration unit to fail.

•This appliance is designed to be installed into cabinet units capable of withstanding temperatures of 65°C or greater above ambient temperature.

•If there is no oven to be built in below the hob, an isolation shelf should be fitted to protect the user from high temperatures. If the hob is to be installed above a working drawer, then a partition should be fitted to protect the contents and user from the heat generated during use. This should be fitted 100mm below the hob.

•Never place perishable foods, cleaning products or flammable items in the cupboard below the appliance.

•If an oven is to be installed below the hob, the thermal safety system on the hob will not allow the hob to be used at the same time as a pyrolytic programme on the oven.

•The hob is equipped with an anti-overheating safety device that can be activated if the hob is installed over an oven that is not sufficiently ventilated. In the event that this occurs, the control panel will show a series of small lines. We recommend that you increase the ventilation of the hob by creating an opening in the side of the cabinet (8 cm x 5 cm).

A – Air intake B – Air outlet C-Hob top D – Power cable

Fig.3

Page 9 Page 11
Page 10
Image 10
CDA HCN610 manual Fitting the Hob
Page 9 Page 11

HCN610 specifications

The CDA HCN610 is an innovative and versatile 60cm dual fuel cooker designed to meet the needs of modern kitchens while delivering exceptional performance. This appliance combines the benefits of both gas and electric cooking, allowing users to enjoy the control of gas burners paired with the even heating of an electric oven.

One of the standout features of the CDA HCN610 is its dual fuel system, which provides the best of both worlds. The four powerful gas burners come in various sizes, accommodating pots and pans of different dimensions, while the electric oven offers precise temperature control for consistent baking results. The hob features a cast iron griddle pan, which is perfect for grilling meats and vegetables, enhancing the cooking experience with deliciously charred flavours.

The CDA HCN610 also includes a 65-litre oven capacity, making it ideal for cooking for large families or entertaining guests. The oven boasts a conventional cooking function as well as a fan-assisted setting, ensuring that food is cooked evenly and thoroughly. Additionally, the appliance features a built-in grill, which is perfect for crisping up dishes or making quick snacks.

One of the key technologies employed in the CDA HCN610 is the easy-clean enamel lining. This special coating makes it easy to wipe down the oven after use, reducing cooking time cleanup efforts significantly. Furthermore, the cooker's flame failure safety device provides peace of mind, ensuring that gas flow is automatically cut off if the flame goes out unexpectedly.

The sleek stainless-steel finish of the CDA HCN610 not only adds a contemporary touch to any kitchen but also improves durability and resistance to stains and scratches. The cooker is designed with intuitive control knobs, enabling users to adjust heat settings easily, ensuring that cooking is always accurate and intuitive.

Energy efficiency is another important consideration, and the CDA HCN610 is designed with this in mind. The oven features an A energy rating, which means it consumes less energy while delivering consistently high performance. This makes the CDA HCN610 an environmentally-friendly choice for conscientious consumers.

In summary, the CDA HCN610 is a feature-rich dual fuel cooker that brings together convenience, safety, and modern technology, making it an excellent addition to any culinary space. With its powerful cooking capabilities, easy maintenance, and sleek design, it is sure to satisfy both seasoned chefs and home cooks alike.
Top Page Image Contents