Using your Hob
Please note:
•A dot will show on either the zone control display or the timer display to demonstrate which is the active control. To select a different control, touch either the required zone control key or the timer key.
To switch the zone on
•Touch the zone control key for the required zone. The zone control display will flash with 0 and for the relevant zone and the hob will beep to confirm the zone is on.
To set the power level
•Touch the + key to increase the power level from 1 (lowest) to P (maximum) and the – key to reduce it.
•To go straight to P, touch the – key once when the zone is switched on.
Please note:
•If a power level is not set within five seconds, the zone will switch off automatically.
To switch the zone off
•Touch and hold the zone control key for the required zone until the display switches off.
The timer
•The timer allows you to preset the length of time any of the zones will be on, between a minimum of one minute and a maximum of
To set the timer
•First switch on the zone and set the power level.
•Touch the timer key repeatedly until the LED in the timer display is lit for the required zone.
•Then touch the + and – keys until the timer display shows the required duration.
•To go straight to the maximum 99 minutes, touch the – key once when the timer is switched on.
Please note:
•The timer will only count down when the cookware is on the zone.
•The timer will count down in minutes, and then in seconds for the last minute.
•At the end of the set time, the zone will switch off, the timer display will flash 0 and the hob will beep for approximately 20 seconds. To stop the beep, touch any key.
To change the timer once set
•Touch the timer key repeatedly until the LED is lit for the required zone.
•Then touch the + and – keys until the display shows the required duration.
To cancel the timer once set
•Touch the timer key repeatedly until the LED is lit for the required zone.
•Then touch and hold the + and – keys simultaneously for approximately three seconds. This will cancel the timer.
Please note:
•If you cancel the timer, the zone will continue at the set power level until it switched off as described above.
