Manual for Installation, Use and Maintenance
VW80 Fully Integrated Intelligent Dishwasher
Customer Care Department The
T
Contents
Contents
Safety instructions
1. Safety and operating instructions
USES OTHER THAN THOSE DESCRIBED ABOVE
NEVER BE REMOVED
Safety instructions
THIS DISHWASHER MUST BE USED BY ADULTS
Safety instructions
AQUASTOP MODELS
APPLIANCE
Installation instructions
2. Installation and hook-up
For free-standing models only
CONNECTING TO THE WATER SUPPLY
2.1 Water supply connection
DRAIN CONNECTION
Installation instructions
2.2 Electrical connection and precautions
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD
Installation instructions
NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD
WHEN CLEANING AND MAINTAINING THE APPLIANCE
Fuse replacement
FOR GREAT BRITAIN ONLY
Installation instructions
3.1 Using the water softening system
User instructions
3. Operating instructions
3.2 Using the rinse aid and detergent dispensers
User instructions
ADJUSTING THE RINSE AID DISPENSER SETTING
ADDING THE RINSE AID
User instructions
ADDING THE DETERGENT
User instructions
3.3 General warnings and recommendations
3/1 Products
Correct loading of the dishes helps ensure optimal washing results
User instructions
Dishes and objects in copper, tin, zinc or brass these tend to stain
User instructions
3.4 Using the baskets
EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES
User instructions
LOWER BASKET
LOWER BASKET
LOADING THE LOWER BASKET
User instructions
With fixed supports
CUTLERY BASKET
UPPER BASKET
User instructions
models with cutlery racks
LOADING THE UPPER BASKET
User instructions
Loading examples ½ LOAD certain models only ½ LOAD
models with cutlery racks
ADJUSTING THE UPPER BASKET
Version B
User instructions
User instructions
4. Cleaning and maintenance
CLEANING THE WATER INTAKE FILTER
CLEANING THE SPRAY ARMS
4.1 General warnings and recommendations
CLEANING THE FILTER UNIT
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE
User instructions
PROLONGED DISUSE
TROUBLESHOOTING MINOR PROBLEMS
If the dishes are not being cleaned properly, check that
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE
Reconnect the water intake hose and open the tap again
If the dishes fail to dry or remain dull, check that
If the dishes show signs of streaking, staining, etc., check that
If there are visible traces of rust inside the tank
User instructions
1. Description of the controls
1.1 Upper panel
SELECTED PROGRAM INDICATOR LIGHTS
User instructions
PROGRAM DELAY BUTTON on some models only
User instructions
SETTING THE WASHING PROGRAM AND SWITCHING ON
User instructions
User instructions
110’ 20 1,70
0,85
1,05
CANCELLING THE CURRENT PROGRAM
1.2 Washing programs
Before starting a washing program make sure that
The correct amount of detergent has been added to the dispenser
SELECTING HALF LOAD WASH on some models only
EXTRA PROGRAMS
User instructions
DELAYING THE PROGRAM on some models only
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT
User instructions
ADJUSTING THE WATER SOFTENING SYSTEM
WATER HARDNESS TABLE
User instructions
END OF CYCLE
REMOVING THE DISHES
User instructions
2. Troubleshooting
E1 E2 E3 E4 E5 E6
FAULT
Safety level
E7 E8 E9
User instructions
Turbine flow-regulator malfunction for the relevant models only
Alternate washing system malfunction