VW80 Fully Integrated Intelligent Dishwasher
Manual for Installation, Use and Maintenance
Customer Care Department The
T
Contents
Contents
1. Safety and operating instructions
Safety instructions
USES OTHER THAN THOSE DESCRIBED ABOVE
NEVER BE REMOVED
THIS DISHWASHER MUST BE USED BY ADULTS
Safety instructions
Safety instructions
AQUASTOP MODELS
APPLIANCE
Installation instructions
2. Installation and hook-up
For free-standing models only
2.1 Water supply connection
CONNECTING TO THE WATER SUPPLY
DRAIN CONNECTION
Installation instructions
IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD
2.2 Electrical connection and precautions
Installation instructions
NEVER DISCONNECT THE PLUG BY PULLING ON THE POWER SUPPLY LEAD
Fuse replacement
WHEN CLEANING AND MAINTAINING THE APPLIANCE
FOR GREAT BRITAIN ONLY
Installation instructions
3.1 Using the water softening system
User instructions
3. Operating instructions
User instructions
3.2 Using the rinse aid and detergent dispensers
ADJUSTING THE RINSE AID DISPENSER SETTING
ADDING THE RINSE AID
User instructions
User instructions
ADDING THE DETERGENT
3/1 Products
3.3 General warnings and recommendations
Correct loading of the dishes helps ensure optimal washing results
User instructions
User instructions
Dishes and objects in copper, tin, zinc or brass these tend to stain
EN 50242 STANDARD LOADS FOR CERTIFICATION BODIES
3.4 Using the baskets
User instructions
LOWER BASKET
LOADING THE LOWER BASKET
LOWER BASKET
User instructions
With fixed supports
UPPER BASKET
CUTLERY BASKET
User instructions
models with cutlery racks
User instructions
LOADING THE UPPER BASKET
Loading examples ½ LOAD certain models only ½ LOAD
models with cutlery racks
ADJUSTING THE UPPER BASKET
Version B
User instructions
User instructions
CLEANING THE WATER INTAKE FILTER
4. Cleaning and maintenance
CLEANING THE SPRAY ARMS
4.1 General warnings and recommendations
GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE
CLEANING THE FILTER UNIT
User instructions
PROLONGED DISUSE
If the dishes are not being cleaned properly, check that
TROUBLESHOOTING MINOR PROBLEMS
BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE
Reconnect the water intake hose and open the tap again
If the dishes show signs of streaking, staining, etc., check that
If the dishes fail to dry or remain dull, check that
If there are visible traces of rust inside the tank
User instructions
1.1 Upper panel
1. Description of the controls
SELECTED PROGRAM INDICATOR LIGHTS
User instructions
User instructions
PROGRAM DELAY BUTTON on some models only
User instructions
SETTING THE WASHING PROGRAM AND SWITCHING ON
110’ 20 1,70
User instructions
0,85
1,05
1.2 Washing programs
CANCELLING THE CURRENT PROGRAM
Before starting a washing program make sure that
The correct amount of detergent has been added to the dispenser
SELECTING HALF LOAD WASH on some models only
EXTRA PROGRAMS
User instructions
TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT
DELAYING THE PROGRAM on some models only
TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT
User instructions
ADJUSTING THE WATER SOFTENING SYSTEM
WATER HARDNESS TABLE
User instructions
END OF CYCLE
REMOVING THE DISHES
User instructions
E1 E2 E3 E4 E5 E6
2. Troubleshooting
FAULT
Safety level
User instructions
E7 E8 E9
Turbine flow-regulator malfunction for the relevant models only
Alternate washing system malfunction