Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers.

Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are generated.

For free-standing models only

-Installing a hob on top of a free-standing dishwasher is absolutely forbidden.

-If the appliance is not built-in and is therefore accessible on one side, the door hinge area must be covered for safety reasons (injury hazard). The covering fixtures are available as an accessory from specialist dealers or the After-Sales Service.

-To build in the dishwasher, the special kit must be purchased from authorised dealers or the After-Sales Service.

Some models are equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.



Page 6 Page 8
Page 7
Image 7
CDA VW80 manual Installation instructions, Installation and hook-up
Page 6 Page 8

VW80 specifications

The CDA VW80 is a remarkable addition to the world of vacuum technology, designed specifically for maximum performance and efficiency in various applications. This versatile vacuum pump is engineered to meet the demands of both industrial and commercial environments, showcasing a blend of advanced technology and user-friendly features.

One of the standout characteristics of the CDA VW80 is its robust construction. Crafted with high-quality materials, it offers durability and resistance to wear and tear, making it ideal for continuous operation. This design not only ensures long-lasting performance but also translates to lower maintenance costs over time. The pump's compact footprint allows for easy installation even in tight spaces, facilitating seamless integration into existing systems.

At the heart of the CDA VW80 lies its innovative pumping mechanism. Utilizing advanced rotary vane technology, this vacuum pump generates a high level of suction power while maintaining low energy consumption. This combination results in significant cost savings and makes it an environmentally friendly choice for businesses aiming to reduce their carbon footprint.

The CDA VW80 is equipped with a sophisticated monitoring system that provides real-time data on operational parameters. This feature allows users to track performance metrics such as vacuum levels and maintenance intervals, ensuring optimal efficiency and minimizing downtime. The user-friendly control panel simplifies operation, enabling personnel to adjust settings easily and conduct routine checks with minimal effort.

Another pivotal feature of the CDA VW80 is its quiet operation. Engineered with noise reduction technology, it operates at significantly lower sound levels compared to traditional vacuum pumps, making it suitable for environments where noise pollution must be kept to a minimum. This attribute enhances user comfort while ensuring compliance with workplace regulations regarding noise emission.

Furthermore, the CDA VW80's versatility extends to its ability to handle a wide range of materials and applications. Whether in packaging, food processing, or pharmaceutical manufacturing, this vacuum pump consistently delivers exceptional performance, enhancing productivity across various sectors.

In summary, the CDA VW80 is a high-performance vacuum pump that embodies reliability, efficiency, and versatility. With its advanced rotary vane technology, real-time monitoring system, quiet operation, and durable construction, it stands out as an essential tool for modern businesses looking to enhance their vacuum processes while optimizing costs and environmental impact.
Top Page Image Contents