Failure Codes and Troubleshooting
The programme indicators also serve as a diagnostic display to help in the event of a problem with the appliance.
Error Code | Error description | Advice | |
|
|
| |
F1 | Alarm is active against water overflow. | Turn off the dishwasher and disconnect the water supply. | |
Contact CDA service. | |||
|
| ||
|
|
| |
|
| Drain hose is blocked. | |
F2 | The waste water in the machine can not be | The filters of your machine might be blocked. | |
discharged. | Restart the dishwasher and cancel the programme. | ||
| |||
|
| If the error continues, contact CDA service. | |
|
|
| |
F3 | Continual fill error. | Close the tap and contact CDA service | |
|
|
| |
|
| Make sure the water inlet tap is fully open. | |
F4 | Inadequate water supply. | Close the water tap, separate the water inlet hose from the tap and | |
clean the filter. | |||
|
| ||
|
| Restart your machine, contact CDA service if the error resumes. | |
|
|
| |
F5 | Faulty heater sensor. | Contact CDA service. | |
|
|
| |
F6 | Overheating error (temperature in the | Contact CDA service. | |
machine is too high). | |||
|
| ||
|
|
| |
F7 | Heater error. | Contact CDA service. | |
|
|
| |
F8 | Spray diverter position error. | Contact CDA service. | |
|
|
| |
F9 | Faulty electronic card. | Contact CDA service. | |
|
|
|
13