Installation instructions

2. Installation and hook-up

Remove the polystyrene basket retainers.

Position the appliance in the desired place of installation. The back or sides of the dishwasher may be placed up against walls or other furniture units. If the dishwasher is installed near a heat source, fit the special insulating panel to prevent overheating and malfunction of the appliance. To ensure stability, install integrated or built-under dishwashers only under continuous worktops, and screw them to the adjacent units. To facilitate the installation procedure, the intake and drain hoses can be positioned in any direction; make sure that the hoses are not kinked, crushed or pulled too tightly. Make sure to tighten the locking ring-nut once the pipes have been placed in the direction required. A hole at least 8 cm in diameter is required to allow the power supply cable and pipes to pass.

Level the appliance on the floor using its adjustable feet. This operation is essential for ensuring correct operation of the dishwasher.

Building-in a dishwasher underneath a ceramic hob is absolutely forbidden.

A dishwasher can be built-in underneath a conventional hob provided there is no break in the kitchen worktop, and the dishwasher and hob are installed and secured correctly, so that no hazards are generated.

When installing the dishwasher in a compartment next to one or more other appliances, it is essential to comply with all the recommendations provided by the appliance’s manufacturer (minimum distances, installation procedures, etc.).

The dishwasher is equipped with only one adjustable foot at the rear, which can be adjusted by turning the screw on the lower front part of the appliance.

ù

2.1 Water supply connection

Preventing the risk of clogging or damage: if the water pipe is new or has not been used for a long time, before connecting to the water supply check that the water is clear and free of impurities, to prevent damage to the appliance. The dishwasher must always be connected to the water system with new hoses; old or used hoses must never be reused.

5

Page 6
Image 6
CDA WC460 manual Installation and hook-up, Water supply connection

WC460 specifications

The CDA WC460 is a sophisticated, modern wall-mounted cooker hood designed to enhance both functionality and aesthetics in contemporary kitchens. This appliance merges advanced technology with sleek design, making it a popular choice for homeowners and culinary enthusiasts alike.

One of the standout features of the CDA WC460 is its powerful extraction capacity. With a maximum airflow of up to 750 m³/h, this cooker hood efficiently removes smoke, steam, and cooking odors, ensuring a fresh and clean kitchen environment. This high extraction rate accommodates various cooking styles, from simple frying to elaborate multi-course meals, making it suitable for any culinary task.

The cooker hood is equipped with robust grease filters that effectively trap grease particles, ensuring optimal performance and reducing the likelihood of buildup in the kitchen. These filters are not only efficient but also washable, making maintenance simple and sustainable, as users can easily clean them to maintain performance over time.

Another highlight of the CDA WC460 is its energy efficiency. It features LED lighting, providing bright, focused illumination on cooking surfaces while consuming minimal energy. This is an important consideration for eco-conscious consumers who wish to reduce their carbon footprint without compromising on culinary performance.

In terms of design, the CDA WC460 presents a sleek stainless steel finish that complements a wide range of kitchen decors. Its minimalist aesthetic is perfect for modern homes, integrating seamlessly with other appliances and cabinetry. The wall-mounted structure allows for flexible installation options, making it a versatile choice for kitchen layouts.

Additionally, the CDA WC460 offers user-friendly controls. It includes push-button controls that are intuitive, allowing users to seamlessly adjust fan speeds and lighting with ease. Multiple fan speed settings provide the flexibility to tailor the extraction power according to the cooking activity, ensuring an optimal kitchen atmosphere.

Furthermore, the appliance operates quietly, with noise levels designed to be minimal even at higher extraction speeds. This feature is essential for maintaining a pleasant kitchen environment, especially in open-plan living spaces where noise can be a concern.

In summary, the CDA WC460 is an exceptional choice for those seeking an efficient and stylish cooker hood. With its powerful extraction capabilities, energy-efficient lighting, easy maintenance, and sleek design, it stands out as a reliable appliance for any modern kitchen. As culinary trends continue to evolve, the CDA WC460 is poised to meet the demands of both home cooks and professional chefs alike.