Introduction
Congratulations on the purchase of your Cecilware Griddle/Cheesemelter. Please take a few moments to carefully read through this manual to ensure that the machine is operated and maintained properly. This will enable the best possible performance from this product for many years.
Cecilware will not accept liability for the following if:
*The instructions in this manual have not been followed correctly.
*
*
*The machine has not been handled and cleaned correctly.
Packaging
Cecilware prides itself on quality and service, ensuring that at the time of packing all products are supplied fully functioning and free of damage.
Provided in this package are the following:
*Griddle/Cheesemelter
*Grilling Rack
*Crumb Tray
*Drip Tray
*Manual
Should you find any damage that occurs in transit, please contact your Cecilware dealer immediately.
Installation
Remove the Cecilware Griddle/Cheesemelter from the packaging. Be certain that all protective plastics and residues are thoroughly cleaned from its surface.
Place the Cecilware Griddle/Cheesemelter on a firm level surface; the adjustable feet can assist in leveling.
Local standards and regulations should be consulted in order to abide by standards set in relation to positioning, spacing and ventilation. Cecilware recommends that you allow no less than 4” ventilation gap around the perimeter of this unit. Common sense and initiative should be used when choosing a position and operating of this product.
Caution:
Do not position or operate near combustible materials/flammable objects.
Once your Griddle/Cheesemelter has been placed into position, be sure that the stainless steel waste and crumb trays have been correctly positioned.
Supply the appropriate power and connect to source; your Griddle/Cheesemelter is now ready to turn on and operate. (For power supply, please see technical specification sheet, page 10)
Preparing the cooking surface:
Be sure the cooking surface is clean; then simply turn the unit on and apply a generous amount of oil to the plates, using the thermostat setting of 230º F for the grill. Once the grill has reached that temperature, switch off and wipe the plates clean of excess oil.
The Cheesemelter part of this unit does not need any preparation; it is ready to use.
Caution: The grill and oil will be HOT!!!!!!
2
