Dia. | Part |
| List |
# | # | Description | Price |
1 | 01346 | SILICA GEL WASHER | $ 2.10 |
2 | 01347 | 1 CUP FILTER HOLDER ASSY | 156.40 |
3 | 01348 | 1 CUP STAINLESS STEEL FILTER . . | 24.60 |
4 | 01349 | 1 CUP FILTER HOLDER |
|
|
| WITHOUT FILTER | 121.20 |
5 | 01350 | FILTER SUPPORT | 83.70 |
6 | 01351 | BRASS SPOUT 1 LONG CUP | 23.40 |
7 | 01352 | FILTER CLAMP SPRING D1.4 | 1.00 |
8 | 01353 | FILTER HOLDER KNOB CAP | 14.00 |
9 | 01354 | FILTER HOLDER BACK LID | 1.50 |
10 | 01355 | 2 CUPS FILTER HOLDER ASSY . . . . | 163.00 |
11 | 01356 | 2 CUPS STAINLESS STEEL FILTER . | 24.60 |
12 | 01357 | 2 CUPS FILTER HOLDER |
|
|
| WITHOUT FILTER | 127.90 |
13 | 01358 | 2 CUPS BRASS SPOUT | 30.00 |
5-4 Steam Tube
a.After making steamed milk, use a slightly moistened soft cloth to wipe steam tube. After wiping, release a steam burst through the tube to remove any residual milk remaining in the nozzle.
b.If hardened milk residuals remain in the steam tube, disassemble and immerse tube in hot water for about 20 minutes to soften. Reassemble and repeat step (a).
5-5 Boiler
To extend your boiler’s serviceable life, when the machine is expected to sit idle for a period of one or more days, turn power to the machine OFF and open the steam output to discharge pressure in the boiler. Continue until the pressure gauge reading falls to zero and steam discharge ends. Once complete, empty and clean the water tray and discharge trough. (Important: Leave the steam output setting open following steam discharge. Steam output should remain open until after the machine is turned back on and hot water begins dripping from the steam tube.
5-6 Water Tray
Remove and wash the water tray after stopping your automatic machine. Reassemble after the water tray has dried.
5-7 Discharge Trough
a.After removing the water tray, wipe and remove sediments in the discharge trough with a wet cloth or napkin and wash with hot water to clear the discharge tube.
b.If water does not discharge properly, place a teaspoon of detergent into the discharge trough and flush with hot water to dissolve residual oils in the tube.
5-8 Filter
a.The manufacturer recommends replacing the filter element on the resin exchange filter after processing 53 gallons of water (about 3,000 – 4,000 cups of coffee). This schedule can be expected to vary based on the quality of water used in your machine.
10
