Celestron Power Seeker 50 Telescope Maintenance, Specifications, Eyepiece, Magnification, Lens

Models: Power Seeker 50

1 8
Download 8 pages 33.45 Kb
Page 6
Image 6
Eyepiece

The following magnification levels can be achieved when using the standard eyepiece in conjunction with the 3x Barlow lens:

Eyepiece

Magnification

Mag. with 3x Barlow

 

 

Lens

20mm

30x

90x

12mm

50x

150x

4mm

150x

450x

TELESCOPE MAINTENANCE

With proper care, your telescope should rarely need any maintenance work. To maintain your telescope in the best possible condition, observe the follow suggestions:

1.When your telescope isn’t in use, replace all lens covers to keep dust and contaminants off the optical surfaces.

2.A small amount of dust on any optical surface isn’t a problem and doesn’t need to be removed. If the dust builds up, then use a can of compressed air and a camels hair brush to remove the dust. To remove fingerprints or other contaminants, use an optical cleaning kit or the Celestron Lens Pen (#93575).

3.If the inside of the objective lens needs cleaning, it should be done by a professional. Either have your instrument serviced by a telescope repair facility or return it to the factory for servicing.

 

SPECIFICATIONS

 

PowerSeeker 50’s

Aperture

50mm

Focal Length

600mm

Focal Ratio

f/12

Mounting

Altazimuth

Tripod

Adjustable Aluminum Tripod

NOTE: Specifications are subject to change without notice.

6

Page 6
Image 6
Celestron Power Seeker 50 manual Telescope Maintenance, Specifications, Eyepiece, Magnification, Mag. with 3x Barlow, Lens