ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
12
DD1
a. Position the side burner (DD1) through the opening in the left side burner drip pan (DC).
13
CN
Place the heat shield (CN) into the groove which is located at the back side of the front panel as shown in figure A. Next, attach the heat shield (CN) to the upper back panel (CM) by using the self tapping screws (x 4), as shown in figure B.
THE HEAT SHIELD RESTS BELOW THE FRONT BRACE AND BACK PANEL.
A
DC
A
YOU WILL NEED:
b. Make sure that the side burner (DD1) engages the side burner valve (CC) as shown in figure B.
Underside view
9
X 4
B
c. Using the wing nut provided, assemble the side burner to the side burner drip pan (DC), as shown in figure C.
DC
YOU WILL NEED:
13
C
X 1
d. Attach the end of the side burner electrode wire (DD2) to the underside of the side burner electrode, as shown in figure D.
Ensure that the wire is pushed in firmly.
DD2
D
e. Place the side burner cooking grate(DE) into postion on the side burner shelf, as shown in figure E.
DE
14
CO
EF
EF
ED
B
c. Assemble the towel bar (CO) onto door (EF).
YOU WILL NEED:
1 4 5
X 2 | X 2 | X 2 |
TIP: Before attempting to assemble the door (EF) to the right pillar (ED), locate the two clasps on the door Hinge. Next, locate the two small openings on the right side pillar.
a. Hold the door perpendicular to the BBQ Cart. Align the two clasps on the door hinge (EF), with the two holes on the right side pillar (ED). Once aligned push the two clasps into the openings, and immediately push down to lock clasps in place.
b. Assemble the door (EF) to the right pillar (ED), as shown in figure B, using the screws pro- vided.
YOU WILL NEED:
11
E
X 4
12 | 13 |
