FORWARD-FACING INSTALLATION WITH VEHICLE SEAT BELTS
WARNING
LATCH belt MUST be stored when
using vehicle seat belt to install car
seat.
1Store LATCH belt by attaching to openings in top of car seat. (see page 24 fig. m).
•Hook connectors into storage openings on each side of seat. (fig. a).
•Adjust LATCH belt to remove excess slack by adjustment belt.
5Pull front to back and left to right to check for secure installation (fig. d). Vehicle lap belt MUST stay tight.
If not secure, see “Vehicle Seat Belts” page 25.
6Attach tether strap hook (A) to anchor hardware (B) and tighten strap to remove any slack (fig. e) . If vehicle does not have anchor points to attach tether hook, tether hook should be stored, see “Tether Storage”, page 31.
2Adjust car seat to upright position (see pages 18 and 19 Fig. c) and place
3Thread vehicle seat belt through openings. Buckle belt (fig. b).
4Press down firmly in center of car seat to compress vehicle seat cushion while tightening vehicle seat belt.
Use your knee to press down in center of car seat (fig. c).
Periodically check that car seat is securely installed; adjust if necessary.
10
