Century 44339, 44164 OPERATIONS and ADJUSTMENTS continued, 6ChangingHarnessStrapSlots

OPERATIONS and ADJUSTMENTS (continued)

6ChangingHarnessStrapSlots:

The harness straps must go into the slots even with or just above the shoulders.

A To adjust harness straps:

Remove straps from harness plate and adjuster bar (fig. a).

B Pull strap ends through slots and reinsert them in the correct slots (fig. b).

C Reassemble straps onto adjuster bar exactly as shown (fig. c).

D Push adjuster bar down (fig. d).

ERotate lock down (fig. e).

NOTE:

•Make sure both harness straps are securely attached within Harness Plate and Adjuster bar and locked into place with Harness Lock.

•Make sure straps are NOT twisted.

7OverheadShieldAdjustment(fig.f):

•To adjust: Press both buttons down and move shield to desired position closest to child. Release buttons to lock shield into place. Check by pulling out on shield.

NOTE: Shield does not need to contact child when in closest position; harness system restrains child.

20