Century 44164 F Combination Lap/Shoulder Belt with Sliding Latch Plate, Pull fig. a Flip fig. b

VEHICLE SEAT BELTS (continued)

FCombination Lap/Shoulder Belt with Sliding Latch Plate

Pull on latch plate (fig. a). If belt slides freely through latch plate, a locking clip MUST be used (see Pg. 30 “Locking Clip” section).

Some combination lap/shoulder belts with sliding latch plates may be converted into an “automatic locking mode” that will allow use without a locking clip. See vehicle owner’s manual and label on vehicle belts for instructions.

FCombination Lap/Shoulder Belt with Locking Latch Plate

The locking latch plate on some seat belts may slip and loosen after being buckled on car seat if positioned at a certain angle. If this happens, flip the latch plate over (fig. b) and re-buckle. Test installation again to see if this works. If not, move car seat to another seating position.

Pull

(fig. a)

Flip

(fig. b)

29