PARTS LIST
CHECK that you have all the parts listed below
BEFORE assembling your stroller.
If any parts are missing,
call Customer Service at
or visit our Internet website, www.centuryproducts.com.
THIS PRODUCT REQUIRES ADULT ASSEMBLY.
Rear axle assembly
Retainer | Cap |
(2, 1 extra) | (2, 1 extra) |
Frame
To Assemble Front Wheels
Step 1.
Line up pin on bottom of front leg with the wheel assembly as shown. Plastic snap inside wheel mount must be away from pin.
Step 2. | Plastic |
snap |
Push wheel assembly onto pin until it snaps in place.
Step 3.
Repeat for other wheel.
Pull firmly on each wheel assembly to be sure the wheel assemblies are securely attached.
Rear wheel (2) |
| Front wheel | ||
|
| assembly (2) | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Child’s tray | Parent’s tray |
| (screwdriver required |
| for assembly) |
To Unpack Stroller
Step 1.
Remove stroller from carton. Flatten carton to protect floor.
Step 2. | Storage | |
latch | ||
Release | Flattened | |
storage latch. | ||
carton | ||
|
Step 3.
Open stroller on carton as | Locking | |
latch | ||
shown until locking latches | ||
| ||
on both sides are locked. |
|
Step 4.
Push the footrest down until it snaps onto the bar beneath it.
To Assemble Rear Axle
Brake levers
point UP
Rear legs
Step 1.
Turn stroller over as pictured above.
Step 2.
Position rear axle assembly as shown.
Step 3.
Push both brackets at the same time all the way on until they snap onto the legs.
Pull firmly on each bracket to be sure they are securely attached.
5 | 6 |
