To Adjust Canopy
Push or pull canopy to the desired position.
To Use Child’s Tray
Always secure your child with the seat belt. The child’s tray is not a restraint device.
DO NOT lift the stroller by the child’s tray.
Use care when clamping the child’s tray on the stroller with a child in the stroller.
Snap the child’s tray under the fold latch on both leg tubes as shown.
To Use Parent’s Tray
To avoid burns, never put hot liquids in the parent’s tray. To prevent tipping over, do not place more than 3 lbs. (1.4 kg) on the parent’s tray.
Step 1.
Remove the two screws found on top of the stroller handle tubing just above the canopy. Do not remove canopy screws.
Step 2.
Fold the tray on its “hinge” several times to break in the hinge.
Hinge
Step 3.
Snap parent’s tray to stroller handle as shown. Reinsert screws, attaching tray to handle.
To Adjust Back
Step 1.
To adjust seat to upright position, lift the seat back until both recline latches are locked.
Step 2.
To recline the seat, push the two latches behind the seat toward each other.
Fabric caught in the latches may prevent them from locking. When returning seat to upright position, do not allow fabric to be pinched in the latch.
To Fold Stroller
Step 1.
Before folding stroller, fold canopy and fully recline seat. Apply brakes to prevent stroller from moving.
Step 2.
On certain models, pull both side latches up to release. Fold the handle down.
OR
On models with a
1
2
3
9 | 10 |
