To Assemble Rear Wheels
Place parts in order on rear axle as shown. Push red retainer onto axle BEFORE attaching white cap. Repeat on other side.
Spokes |
|
| |
toward |
|
| |
inside | Wheel | Cap (white) | |
|
| ||
|
| Attach AFTER | |
|
|
| |
|
|
| retainer is on |
|
|
| axle |
Rear | Retainer | (red) | |
axle | Wide end toward wheel | ||
Snap red retainer into axle groove. Then snap cap over red retainer as shown.
Be sure cap is snapped securely over red retainer.
To Unfold Stroller
Step 1.
Release storage latch and begin opening stroller.
Step 2.
Continue unfolding until both latches lock.
To Use Brakes
Always apply both brakes when parking stroller.
Push DOWN to park.
Check to make sure brake is on by pushing the stroller.
Lift UP to stroll.
To Change to Swivel or Non-swivel Wheels
Front swivel wheels lock for use on uneven surfaces such as grass, stones or gravel.
Before locking swivels, first push stroller forward a few feet to ensure the wheels are correctly positioned.
Push buttons up or down, depending on model, to lock or release swivels. Turn swivel to check that it is locked or released.
To Secure Your Child
Avoid serious injury from falling or sliding out. Always use seat belt.
Your stroller may have a single button buckle or double button buckle seat belt. Follow the appropriate instructions below.
Single Button Buckle Seat Belt:
Place crotch strap between child’s legs. Snap both side buckles to the center buckle. Adjust belt as needed to get a snug fit around your child.
Push in on front of buckle to release.
Double Button Buckle Seat Belt:
Place crotch strap between child’s legs. Snap both side buckles to the center buckle. Adjust belt as needed to get a snug fit around your child.
Push in on front of buckle to release.
7 |
|
8 | |
|
|
