OPERATIONS and ADJUSTMENTS
1Harness Tie:
2-Piece (available on some models):
•To open: Squeeze tabs and pull apart.
•To close: Snap halves together. Make sure harness tie is locked by pulling out on each half.
1-Piece:
•To open: Unhook harness tie from child’s left side (fig. a) of harness strap.
•To close: From backside of harness tie, slide harness strap over harness tie tongue.
2Adjustable Handle:
•Handle has four adjustment positions.
•Push in red buttons on each side of handle, rotate and release red buttons. Continue rotating handle to desired position until you hear a “click” sound.
•IMPORTANT: Before lifting car seat, place handle in “locked” upright carrying position.
3Buckle:
3-Point Models
•To buckle: Push buckle down on tongue. Pull up on buckle to be sure it is locked.
•To unbuckle: Press red button and pull buckle off tongue.
•To buckle: Insert both tongues into buckle. Pull up on tongues to be sure they are locked.
•To unbuckle: Press red button and pull harness tongues out of buckle.
4Removing Car Seat from Base:
•Place handle in “locked” upright carrying position.
•Squeeze red release lever in base (fig. b).
•Lift car seat out of base.
5Adjustable Base (available on some models):
•Pull blue adjustment Handle out (fig. c).
•Adjust Foot to desired position.
•Release adjustment handle. Be sure it retracts into slot.
10
