ASSEMBLY
Front Wheel Assembly
1Hold swivel wheel assembly
upright (Tab pointing down).
Tab
2 Tilt stroller slightly back and push wheel assembly onto leg until it locks in place.
Repeat steps 1 and 2 for opposite leg.
Opening Stroller
1 Stand stroller upright and rotate lever to release latch.
2Spread handle and rear legs until both Fold Locks “click”
into position. | Fold Locks |
CAUTION: After wheel assembly is complete, pull on wheels to check that they are locked in place.
Locking Footrest
Push footrest down so that Cross Tube is centered between three (3) Tabs on bottom of footrest, and it snaps in place.
Cross Tube | Tabs |
Rear Wheel Assembly
1Remove axle protectors from ends of axle and discard.
2 With stroller laying face down on floor, slide brake lever brackets onto rear legs until you hear a click.
NOTE: Brake levers must face rear of stroller.
3
