ASSEMBLY and USE continued

Changer

Changer can only be used when bassinet is installed in Playard.

WARNING

Avoid serious injury or death:

• Always use restraint belt to prevent falls.

• Use with infant who weighs less than 8.2 kg (18 lbs.) and is less than 63.5 cm (25 inches) tall.

• Discontinue use of changer if infant can push up on hands and knees or sit unassisted.

• DO NOT carry changer with infant in it.

1 Lay changer on flat surface.

Triangular T-Fitting

Tab

2 Grasp middle of each long side and gently pull apart until short sides “click” and lock in place.

NOTE: Make sure changer sides are fully extended and locked.

3 With vinyl side facing up,

T-Slot

insert two (2) “T-Fittings”

 

on changer into “T-Slots”

T-Fitting

in bassinet and push down

 

to secure.

 

4Push Triangular Tabs into

TriangularHoles in Playard

Triangular

corners.

Tab

 

Triangular

 

Hole

5 Secure changer to Playard:

Pass Attachment Strap

through opening in corner of side panel of Playard.

• Fasten strap to outside of Playard.

Repeat for other strap. Attachment

Strap

6 Place storage pocket flap over side of Playard.

NOTE: DO NOT place supplies weighing more than 2.3 kg (5 lbs.) in storage pocket.

Changer is now ready for use.

6

Page 7
Image 7
Century PM-1645AA instruction manual Changer