Information Messages When Copying
Message | Action | |
ADF paper empty | Press the OK button. Reload your documents into the auto document feeder and try | |
| again. | |
|
| |
ADF cover open | Close the ADF door and press the OK button. | |
Flatbed cover open | Close the scanner lid. Remove any paper from the ADF and press the OK button. | |
Flatbed Light Check | Power cycle the scanner. | |
| If the code still appears, contact your nearest dealer. | |
|
| |
Calibration Error | Power cycle the scanner. | |
| If the code still appears, contact your nearest dealer. | |
|
| |
Error_Flatbed Home | Power cycle the scanner. | |
Position | If the code still appears, contact your nearest dealer. | |
Error_Pick Up Roller | • | If this occurs while previewing, split your |
|
| batches and try again. |
| • | If this occurs while scanning, the pick up roller may not work properly. Contact |
|
| your nearest dealer for a replacement. |
|
| |
Home sensor error | Power cycle the scanner. | |
| If the code still appears, contact your nearest dealer. | |
|
| |
Lamp error | Power cycle the scanner. | |
| If the code still appears, contact your nearest dealer. | |
|
| |
ADF paper jam | ADF paper jam. | |
| Open the ADF cover and remove the paper from the ADF. | |
| If the code still appears, power cycle the scanner. | |
| If the code still appears, contact your nearest dealer. | |
|
| |
Lock error | Scanning unit is locked. | |
| 1. | Turn off your scanner. |
| 2. | Find the lock switch underneath the scanner lid, to one side of the flatbed glass, |
|
| and unlock the machine. |
| 3. | Turn the scanner back on. |
| 4. | If the code still appears, contact your nearest dealer. |
|
|
|
Check printer cable or | 1. | Check if the printer cable has been correctly connected. |
status | 2. | Check if the printer is turned on. |
| 3. | Restart the scanner and your printer. |
| 4. | If the message still appears, contact your nearest dealer. |
|
|
|
Detect printer error | 1. | Turn off the scanner. |
| 2. | Turn off the printer. |
| 3. | Turn on the printer. |
| 4. | Turn on the scanner. |
|
| |
Paper size not supported | Please set the supported paper size to the tray of the printer. HLT and * are not sup- | |
| ported. | |
|
|
|
