1.Press the Menu button on the scanner.
The LCD touch screen displays the following menu.
2.Press the Network Settings button on the LCD touch screen.
3.In the Network Settings menu, either input your network parameters in each field, or press ON under “DHCP Enable”.
To fill in the fields manually, press the keyboard icon next to each input field. This displays the
If you turned on DHCP, an IP address will automatically be assigned when you power cycle the scanner.
4.Press OK when you are finished. Power cycle the scanner when the LCD screen displays the message “Reboot the machine.”
When the scanner is on again, you will be able to access the network from the scanner, and you will be able to configure the scanner remotely from a computer on the network.
