Whirlpool RF386PXD warranty Using Your Range, Using the surface units, Surface00unit markers

Using Your Range

To obtain the best cooking results possible, you must operate your range properly. This section gives you important information for efficient and safe use of your range.

Using the surface units

Push In control knobs before turning them to a setting. You can set them anywhere between HI and OFF.

Surface00unit markers

The solid dot in the surface unit marker shows which surface unit is

q turned on by that knob.

Surface unit indicator lights

One of the Surface Unit Indicator Liahts on the control panel will glow when a surface unit is turned on.

Hot swface indicator lights

One of the Hot Surface Indicator Light(s) on the cooktop will glow when a surface unit becomes too hot to touch. The Indicator Light will continue to glow as long as the surface unit is too hot

to touch, even after it is turned off.

	Fire	Hazard
I	Turn all controls off when done		I
	cooking.

Failure to do so can result in death,
fire, or burns.	I

Until you get used to the settings, use the following as a guide. For best results, start cooking at the high setting; then turn the control knob down to continue cooking.

SElTING RECOMMENDED USE

HI l To start foods cooking.

l To bring liquids to a boil.

5-8 l To hold a rapid boil. l To fry chicken or

Dancakes.

5 l For gravy, pudding, and icing.

l To cook large amounts of vegetables.

2-4 l To keep food cooking after starting it on a higher setting.

LO l To keep food warm until readv to serve.

8