Troubleshooting
Most cooking problems often are caused by little things you can find and fix without tools of any kind. Check the lists below and on the next page before calling for assistance or service. If you still need help, see “Requesting Assistance or Service” on page 49.
If nothing operates, check the following:
Is the range plugged into a live outlet with the proper voltage? (See Installation Instructions.)
Have you blown a household fuse or tripped a circuit breaker?
Other possible
I PROBLEM
The oven will not operate
The surface units will not operate
IControl knob(s) will not turn
The
problems and their causes:
CAUSE
l You have not set the electronic control correctly. Refer to the section in this manual describing the function you are operating.
l You have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the control.
l You have blown a household fuse or tripped a circuit breaker.
l You have not set the control knobs correctly. Push control knobs in before turnina to a settina.
lYou are not pushing in before turning.
l You did not press the Start/Enter pad.
lThe Lock Lever is not in the Clean position - all the way to the right.
l You have programmed a delayed start time. Wait for the start time to be reached or cancel and reset the control.
continued on next page
47