Whirlpool RF386PXD warranty The electronic oven control, Display/clock, Command pads

The electronic oven control

Electronic	Timer set	and	Clock pad
display	off pads	(p. 14)	(P. 13)

Manual oven - light pad

(P. 46)

- Off/cancel pad (P. 15)

Oven	Temperature	Electronic	Hour	Minute	Start/enter
selector	pads	MEALTIMERTM	pads	pads	pad (P. 15)
pads		control pads
		(P. 22)

Display/clock

l When you first plug in the range, every- thing on the display will light up for l-2 seconds, then a time of day and “PF”will appear on the temperature display. If, after you set the clock (page 13), “PF”again appears on the display, your electricity was off for a while. Reset the clock.

l When you are not using the oven, the control is an accurate clock.

l When you are using the oven or Minute Timer, the display will show times, temp- erture settings, and what command pads have been pressed.

l When showing the time of day, the display will show the hour and minutes.

l When you are using the Minute Timer, the display will show minutes and seconds in the following sequence:

-For settings from 1-59 minutes, the display will count down each second.

-For settings 1 hour or over, the display will count down each minute.

l When you are using Cook Time and/or Stop Time, the display

COOK STOP will show hours and

TIME TIME minutes.

CID

Command pads

The command pads tell the oven what to do and in what order. A few examples:

-Clock tells the oven you are going to set 0CLOCK the clock.

-Off/Cancel tells the oven to turn off.

Each command pad (except Off/Cancel and Start/Enter) has its own Indicator Light. The Indicator Light comes on when you press the command pad.

Using the control lock

The control lock prevents unwanted use of the oven by disabling the control panel command pads.

NOTES:

l Control lock is only available when oven is not in use or control has not been set. l Set control lock when cleaning the control

panel to prevent oven from accidentally turning on.

12