Whirlpool RF386PXD warranty Set start, Press Stop Time pad, Set stop, Complete, time

5. Set start	time.	PRESS
Press the “up”(A) or “down” (V) pad(s)
until the correct time shows on the
display.
Example at right shows a desired
start time	of 2:O0.

(example shows 2 o’clock

start time)

6. Press Stop Time pad. PRESS YOU SEE

7.	Set stop	time.	PRESS	YOU SEE
	Press the “up”(A) or “down” (V)
	pad(s) until the correct time shows on
	the display.
	Example at right shows a desired
	stop time of 2:30. This provides a 30-			(example shows 2:30 stop time)
	minute cook time (the difference
	between the start and stop times).
	NOTE: If you do not set a stop time,
	the colon will flash on the display and
	STOP and COOK will flash alternately
	to remind you to program a stop time
	or a cook time. (See page 26 for
	instructions on how to set delay start
	and stop automatically using Cook
	Time and Delay Start Time.)
8.	Complete	entry.	PRESS	YOU SEE
	NOTES:
	l You can change the temperature or
	time settings any time after pressing
	the Start/Enter pad by repeating
	Steps 2 through		8.
	l The dlsplay will show “door”and a
	tone will sound once every 5 seconds
	if the door is latched (Lock Lever set
	at the clean position) when you try to			continued on next page
	bake/roast.

29