Harness System removal and re-assembly, Removal

HARNESS SYSTEM - removal and re-assembly

•Lift adjuster bar and pull both harness straps out of current slots.

•Pull harness strap out of car seat, harness tie, and tongues.

Store all parts for future use.

•Push buckle and crotch strap down into crotch strap opening.

Re-assembly:

When re-assembling harness system, be sure harness straps are not twisted.

1Thread end of harness strap down through slot in seat pad, under both Clips on bottom and back up through slot in opposite side of

car seat pad.

2Thread ends through tongues or shields (available on some models).

3Thread end through harness tie.

4Thread ends through desired slots and adjuster following instructions in “Operations and Adjustments” section.

5Pull buckle out of of buckle slot.