CERWIN-VEGA! PROFESSIONAL ACTIVE SERIES
BEFORE YOU BEGIN
The Cerwin-Vega! active speakers covered by this manual are designed for portable applications in which the speakers will
be stacked directly on the fl oor, stage, a solid, stable platform, mounted on a tripod stand or pole-mount. Cerwin-Vega! does
not support suspension of the subwoofer models covered by this manual nor are these models intended for fi xed installation in
outdoor or high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical
contacts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver
suspension will prematurely dry out and fi nished surfaces may be degraded by long-term exposure to intense ultra-violet (UV)
light.
Cerwin-Vega! active speakers can generate considerable energy. When placed on a slippery surface such as polished wood
or linoleum, the speaker may move due to its own mechanical vibration. Precautions should be taken to assure that the speaker
does not fall off a stage or table on which it is placed.
Some Cerwin-Vega! active speakers include a receptacle cup to allow mounting of a satellite speaker on top of the subwoofer
using a standard speaker pole shaft. When using a standard speaker pole shaft, be sure to observe the following precau-
tions:
• Check the speaker pole shaft specifi cation to be certain it is designed to support the weight of the speakers.
• Observe all safety precautions specifi ed by the speaker pole shaft manufacturer.
• Always verify that the subwoofer is placed on a fl at, level, and stable surface
• Route cables so that performers, production crew, and audience will not trip over them, toppling the speaker.
• Always be cautious in windy, outdoor conditions as the stability of the entire system may be compromised.
Cerwin-Vega! active speakers are easily capable of generating sound pressure levels (SPL) suffi cient to cause permanent hear-
ing damage to performers, production crew and audience members. Caution should be taken to avoid prolonged exposure
to SPL in excess of 90 dB.
Built-in Amplifi er Precautions
Do not attempt to service this unit. Refer all servicing to a Cerwin-Vega!/Stanton Authorized Service Center. Servicing is
required when the apparatus has been damaged in any way, such as power-supply input connector is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped. Keep your Cerwin-Vega! subwoofer amplifi er module away from sources of heat, such as a
radiator or oven. Do not cover or surround your Cerwin-Vega! subwoofer amplifi er module with material that may retain heat,
such as a blanket or curtain. Be certain that the vents on the panel of the amplifi er module are clear of all obstructions during
operation.
Warning
Shock Hazard: To reduce risk of fi re or electric shock, do not expose this unit to rain or moisture. Do not immerse your
Cerwin-Vega! amplifi er module in any liquid. Do not operate your Cerwin-Vega! powered speaker system near a pool, bath-
tub or other standing water. Do not bypass or defeat the grounding or polarization means used on the Cerwin-Vega! amplifi er
module. Make sure all blades on the polarized power plug can be fully inserted into the receptacle or other outlet that will be
used with the unit. Your Cerwin-Vega! amplifi er module should be cleaned only with a dry cloth. Take care of the power cord
attached to your Cerwin-Vega! amplifi er module. Avoid situations where your cord might be stretched, pinched, or otherwise
abused. Route it to avoid foot traffi c. Pay special attention to the cord connector and attachment points.
2
MANUAL_CVA28manual20-7.indd 3MANUAL_CVA28manual20-7.indd 3 8/9/07 12:00:48 PM8/9/07 12:00:48 PM