![](/images/new-backgrounds/1057893/5789323x1.webp)
PYROMASTER ® UVHB10
Accessories
The following accessories for these heaters are available from your local Pyromaster distributor. Each accessory
comes with a separate installation instruction for mounting to the particular heater. Be sure to read each
instruction thoroughly before installing.
Accessory | Description | Part No. | |
Fan | Provides air flow | FK24 |
|
Electrical Cord (6 ft.) | Used to connect fan | 51865 |
|
Fan Temperature Sensor |
| 51740 |
|
Speed Control | Allows speed adjustment for fan | 51738 |
|
Speed Control Knob |
| 51882 |
|
CAUTION: This heater is a highly engineered system, and, as such, must be operated only with PYROMASTER approved components. If you use an unapproved component to make any modifications, you may create a possible fire hazard and will void the PYROMASTER warranty. In addition, such action may void the coverage provided by the owner’s insur-
ance.
Contact CFM Harris Systems for questions concerning prices and policies covering replacement parts. Parts may be ordered through your CFM Harris Systems distributor or dealer.
You will need the following information when ordering replacement parts:
1.The heater model number.
2.The serial number.
3.A description of the part.
Should you need additional information beyond what your dealer can furnish, contact:
Model and serial numbers are listed on the rating plate (located on the instruction plate behind the bottom louvre).
Record your model and serial numbers here for future reference:
Model # ____________________________
Serial # ____________________________
CFM Corporation
2695 Meadowvale Boulevard
Mississauga, Ontario L5N 8A3 Canada
(800)
www.cfmcorp.com
12 | 20004232 |