Grizzly manual Accessories, H9893 Carbide Inserts Model G0634XP Mfg /11+

4.Clean all dust and dirt off the insert and the cutterhead pocket from which the insert was removed, and replace the insert so a fresh, sharp edge is facing outward.

Note: Proper cleaning is critical to achieving a smooth finish. Dirt or dust trapped between the insert and cutterhead will slightly raise the insert, and make noticeable marks on your- workpieces the next time you plane.

5.Lubricate the Torx screw threads with a light machine oil, wipe the excess oil off the threads, and torque the Torx screw to 55 inch/ pounds.

Note: Do not overlubricate. Excess oil may squeeze between the insert and cutterhead, thereby lifting the insert slightly and affecting workpiece finishes.

Accessories

H9893—Carbide Inserts (10 Pk) for G0634XP These indexable carbide inserts can be rotated to provide four factory sharp edges before replace- ment. Size: 15 x 15 x 2.5mm.

Figure 12. H9893 Carbide Inserts.

-12- Model G0634XP (Mfg. 4/11+)