MODEL G0634XP

POLAR BEAR SERIES

12" JOINTER/PLANER

MAnual Insert

Congratulations on your purchase of the Model G0634XP 12" Jointer/Planer! The Model G0634XP is the same machine as the Model G0634 but with a "cool" new look, a different type of spiral cutterhead, and a new end-mounting fence. Except for the differences noted in this insert, all other content in the Model G0633/G0634 manual applies to this machine. Before operating your new machine, you MUST read and understand this insert and the entire G0633/G0634 manual to reduce the risk of serious personal injury.

If you have any questions about this manual insert or the differences between the Model G0634XP and the Model G0633/G0634, contact our Technical Support at (570) 546-9663 or email techsupport@grizzly.com.

Machine Inventory

After all the parts have been removed from the crate, you should have the following items:

Common Components (Figure 1)

Qty

A. Jointer/Planer Assembly (Not Shown)

........ 1

B.

Push Blocks

2

C.

Cutterhead Guard Assembly

1

D.Hardware and Tools (Not Shown)

— Wrenches 8/10, 12/14mm

1 Ea

— Hex Wrenches 3, 4 mm, 3/32"

1 Ea

 

C

B

 

Spiral Cutterhead Hardware (Figure 2)

 

E. Spiral Cutterhead Hardware

 

—Indexable Carbide Inserts

5

—Flat Hd Torx Screws 10-32 x 12" T25

10

—Torx Drivers T25

5

—T-Handle Wrench 1/4"

1

E

Figure 2. Spiral cutterhead hardware.

Figure 1. Common components.

Copyright © JANUARY, 2011 By Grizzly Industrial, Inc., REVISED MARCH, 2011 (TS)

Warning: No portion of this manual may be reproduced in any shape or form without the written approval of Grizzly Industrial, inc. (For models manufactured since 4/11) #BL13649 printed in TAIWAN

Page 1
Image 1
Grizzly G0634XP manual Machine Inventory, Spiral Cutterhead Hardware Figure