Grizzly G0634XP Lubrication Setting Fence Stops, Tools Needed Qty, To set the 90˚ fence stop

Lubrication Setting Fence Stops

Follow all lubrication instructions outlined on Pages 35–36of the manual. Lubricate the G634XP fence with multi-purpose grease, as shown in Figures 7–8.

Figure 7. Inside fence lubrication locations.

The fence stops simplify the task of adjusting the fence to 45˚ and 90˚.

Tools Needed	Qty
45° Square	1
90° Square	1
Sliding Bevel	1
Wrench 10mm	1
Wrench 12mm	1
Hex Wrench 3mm	1
Hex Wrench 4mm	1
To set the 90˚ fence stop:

1.Loosen the lock nut on the 90° fence stop screw shown in Figure 9, and loosen the fence tilt knob.

Figure 8. Outside fence lubrication location.

-10-

Lock Nut

90˚Stop Screw

Figure 9. Adjusting fence to 90°.

2.Place a 90° square against the table and fence, and adjust the stop screw so the fence is set exactly at 90°.

3.Tighten the lock nut.

Model G0634XP (Mfg. 4/11+)