CFM Corporation Winter Warm - Small Insert Operation, Your WinterWarm Insert’s, The Damper

Models: Winter Warm - Small Insert

1 24
Download 24 pages 42.41 Kb
Page 9
Image 9
Operation

WinterWarm Small Insert

Operation

Your WinterWarm Insert’s

Controls and What They Do

All WinterWarm Small Insert controls are conveniently located on the front. (Fig. 8)

Three controls regulate the performance of your Winter- Warm Small Insert:

The primary air control supplies oxygen for the fire.

The damper directs air flow within the fireplace.

The variable-speed fan control, or rheostat, regulates the warm air flow into the room.

Primary Air Control Lever

2:00 High

3:00 Medium

4:00

4:30 Low

FP1100

Fig. 9 Settings for the primary air control range from 2:00 (high burn rate) to 4:30 (low burn rate).

The Damper

Damper Control

Primary AirLever

Control Lever

Fan Speed Control

FP1099

Fig. 8 WinterWarm Small Insert controls.

Primary Air Control

A single air control regulates the amount of heat the fire will produce and how long it will burn.

The primary air control lever is located midway up the left side panel. The lever regulates air for starting, maintaining, and reviving the fire.

Generally, more air entering the stove makes the fire burn hotter and faster, while less air prolongs the burn.

The WinterWarm Small Insert’s air supply is increased when the control lever is moved counterclockwise, and decreased when moved clockwise. It may be set any- where between the two extremes, however, depending on the amount of heat desired. (Fig. 9)

To complement the manual setting of the air control, the WinterWarm Small Insert has an internal automatic thermostat that ensures an even delivery of heat at the manual setting you select.

The damper directs air flow within the fireplace. The damper is operated by moving the lever located above the door. It has two positions: Open, to start or revive the fire; and closed, for normal operation. The damper is open when the lever is to the far right, and closed when to the far left. There are no intermediate settings

for damper position. (Fig. 12)

To open the damper, insert the fall-away handle into the hole in the lever, lift up on the lever and move it to the far right.

To close the damper, move the lever to the left, continu-

ing past the resistance to lock the damper in position.

Damper Open

Damper

 

Secondary Air

Inlet

Damper Closed

Damper

Catalytic

Combustor

Secondary Air

Inlet

FP1071/2a

Fig. 10 When the damper is open, smoke is vented directly to the chimney. When the damper is closed, smoke is chan- nelled through the catalytic combustor.

2000888

9

Page 9
Image 9
CFM Corporation Winter Warm - Small Insert Operation, Your WinterWarm Insert’s, Controls and What They Do, The Damper