All ONE-PIECE Door Installation Procedure

Please read and comply with the warnings and reinforcement instructions on page 20. They apply to one-piece doors also.

•

Center the bracket on the top of the door, in line with

 

 

 

 

the header bracket as shown. Mark holes.

 

 

 

 

 

 

 

 

 

Hardware Shown Actual Size

 

•

Drill 5/16" pilot holes and fasten the door bracket with

 

 

 

 

 

 

hardware supplied.

 

 

 

If the door has no exposed framing, drill 3/16" pilot holes

 

 

 

and fasten the bracket with 5/16"x1-1/2" lag screws (not

 

 

 

supplied) to the top of the door.

 

 

 

The door bracket may be installed on the top edge of the door if required for your installation. (Refer to the dotted line optional placement drawing.) Drill 3/16" pilot holes and substitute 5/16"x1-1/2" lag screws (not supplied) to fasten the bracket to the door.

21