Chamberlain 2220RGD 1/2 HP manual

Raynor Garage Doors 1101 E. River Road Dixon, Illinois 61021 www.raynor.com

GARAGE DOOR OPENER

Model 2220RGD 1/2 HP

For Residential Use Only

Owner’s Manual

■Please read this manual and the enclosed safety materials carefully!

■Fasten the manual near the garage door after installation.

■The door WILL NOT CLOSE unless the Protector SystemÆ is connected and properly aligned.

■Periodic checks of the opener are required to ensure safe operation.

■The model number label is located on the front panel of your opener.

Contents

For Residential Use Only Introduction Assembly Installation Adjustment Operation Preparing your garage door Tools needed Planning Carton Inventory Fasten the Rail to the Motor Unit Install the Trolley Attach the Rail Brackets Determine the Header Bracket Location Install the Header Bracket Attach the Rail to the Header Bracket Install The Protector System® INSTALLING THE BRACKETS Garage door track installation (preferred): Figure Wall installation (Figures 2 & 3): Floor installation (Figure 4): MOUNTING AND WIRING THE SAFETY SENSORS Recommended Wire Routing Do not use the lower (trolley) channels Position the Opener Hang the Opener Install the Door Control Install the Lights Attach the Emergency Release Rope and Handle Electrical Requirements Complete Safety Reversing Sensor Installation Fasten the Door Bracket ONE-PIECEDOORS Metal Doors: Connect Door Arm to Trolley ALL ONE-PIECEDOORS 1.Assemble the door arm, Figure 4: 2.Adjustment procedures, Figure 5: ïOpen door adjustment: decrease UP travel limit ïClosed door adjustment: decrease DOWN travel limit Adjust the UP and DOWN Travel Limits Adjust the Force Test the Safety Reversal System Test the Protector System® Using Your Garage Door Opener Using the Wall-Mounted Door Control To Open the Door Manually CARE OF YOUR OPENER LIMIT AND FORCE ADJUSTMENTS: MAINTENANCE SCHEDULE Once a Month Once a Year HAVING A PROBLEM 1. My door will not close and the light bulbs blink on my motor unit: 2. My remotes will not activate the door: 3. My door reverses for no apparent reason: 1 FLASH 2 FLASHES 3 FLASHES 4 FLASHES 5 FLASHES To Add and Reprogram an Additional Hand-heldRemote Control To Erase All Codes From Motor Unit Memory *3-ButtonRemotes To Add, Reprogram or Change a Keyless Entry PIN Rail Assembly Parts Installation Parts Motor Unit Assembly Parts ACCESSORIES Model 1702LM Outside Quick Release Model 971RGD SAFETY SIGNAL Single-Button RAYNOR ONE-YEARLIMITED WARRANTY LIFETIME MOTOR LIMITED WARRANTY