![](/images/backgrounds/52313/52313-4027x1.png)
Using the Wall-Mounted Door Control
THE SMART CONTROL PANELTM
Press the push bar to open or close the door. Press again to reverse the door during the closing
cycle or to stop the
door while it's
opening.
(PROG) Learn Feature
The door control is equipped with a PROG <LEARN> button to assist in learning remote controls to the unit. Press the PROG <LEARN> button once to initiate LEARN mode and the display will show ‘Learn Remote Control - Press Learn Button Again to Confirm’. Press the PROG <LEARN> button a second time and the display will show ‘Learn Mode - Press Remote Control Button to Learn Remote.’ Press the button of the remote control to be learned and the worklight will blink to confirm the remote
This door control contains a motion sensing detector that will automatically turn on the light when it detects a person
Hour Minute
Language
LOCK
LIGHT
Light
Button
control has been learned.
Hour & Minute Feature
HM Press or hold either of these side buttons to
entering the garage.
Degrees (F/C)
Lock Button
increment the hour or minute displayed on
the LCD display.
Light feature
Press the Light button to turn the opener light on LIGHT or off. It will not control the opener lights when the
door is in motion. If you turn it on and then activate the opener, the light will remain on for
When using the opener lights as working lights, we recommend that you first disable the motion sensor. See Automatic Light Feature, below.
Motion Sensing (Automatic Light Feature): The opener light will turn on automatically when a
person enters the garage. When a person walks in front of the door control, the light will come on
for five minutes, then shut off. This feature works by detecting body heat.
To disable this feature, push the motion sensing button on the side of the door control.
We recommend that you disable the motion sensor when using the opener lights as working lights. Otherwise, they will turn off automatically if you are working beyond the sensors range.
Lock feature
Designed to prevent operation of the door from LOCK
open and close from the Door Control, the Outdoor Key Switch and the Keyless Entry Accessories.
To activate, press and hold the Lock button for 2 seconds.
To turn off, press and hold the Lock button again for
2 seconds. The Lock feature will also turn off whenever the “learn” button on the motor unit panel is activated.
(LANG) Language Feature
Press this side button to toggle between the three languages - English, French and Spanish.
Degrees F/C Feature
Press this side button to toggle the temperature units between Fahrenheit and Celsius.
Display Contrast Adjustment
Press and hold the light button then push the hour button to increase the contrast or the minute button to decrease the contrast.
27