INSTALLATION STEP 8

Mount the Standby Power Unit (SPU) (not provided)

If the optional 475LMC Standby Power unit is part of this installation it should be installed at this time.

• The SPU can be mounted to either the ceiling or a wall within 3' (.9 m) of the motor unit.

• Position the SPU as desired to a structural support (ceiling joist or wall stud).

• Attach the SPU to the support using the mounting holes on either side of the SPU.

• Secure the SPU using the 1-1/2" lag screws (2) provided with the SPU unit.

• Connect the SPU cord into the connector on the bottom of the motor unit.

• Follow all instructions included with the 475LMC unit to

475LMC Standby Power Unit

test for proper operation and testing of the SPU.

SPU Cord

Connector

13