Chamberlain CG40 manual

®	The Chamberlain Group, Inc.
	845 Larch Avenue
	Elmhurst, Illinois 60126-1196
	www.chamberlaingroup.com

GARAGE DOOR OPENER

Series CG40 1/2 HP

For Residential Use Only

Owner’s Manual

■Please read this manual and the enclosed safety materials carefully!

■Fasten the manual near the garage door after installation.

■The door WILL NOT CLOSE unless the Protector System® is connected and properly aligned.

■Periodic checks of the opener are required to ensure safe operation.

■The model number label is located on the front end panel of your opener.

Contents

For Residential Use Only Introduction Assembly Installation Adjustment Operation Preparing your garage door Tools needed Planning Planning (Continued) Carton Inventory Hardware Inventory Assemble the Rail and Attach the Cable Pulley Bracket Install the Trolley Fasten the T-Railto the Motor Unit Install the Chain/Cable and Attach the Sprocket Cover Tighten the Chain and Cable Determine the Header Bracket Location EXAMPLE One-piecedoor without track: jamb hardware One-piecedoor without track: pivot hardware Install the Header Bracket Attach the T-Railto the Header Bracket Position the Opener Hang the Opener Install the Door Control Install the Light and Lens Attach the Emergency Release Rope and Handle Electrical Requirements Install The Protector System® INSTALLING THE BRACKETS Garage door track installation (preferred): Wall installation: Floor installation: MOUNTING AND WIRING THE SAFETY SENSORS ALIGNING THE SAFETY SENSORS TROUBLESHOOTING THE SAFETY SENSORS Fasten the Door Bracket ONE-PIECEDOORS Metal Doors: Connect Door Arm to Trolley ALL ONE-PIECEDOORS 1.Assemble the door arm: 2.Adjustment procedures: •Open door adjustment: decrease UP travel limit •Closed door adjustment: decrease DOWN travel limit Adjust the UP and DOWN Travel Limits Adjust the Force Test the Safety Reversal System Test the Protector System® Using Your Garage Door Opener Using the Wall-MountedDoor Control To Open the Door Manually Care of Your Opener Having a Problem Having a Problem? (Continued) To Add an Additional Hand-heldRemote Control To Erase All Codes From Motor Unit Memory *Multi-FunctionRemotes To Add or Change a Keyless Entry PIN Rail Assembly Parts Installation Parts Motor Unit Assembly Parts ACCESSORIES 953CB 956CB 945CB 935CB www.chamberlain-diy.com CHAMBERLAIN GARAGE DOOR OPENER ONE-YEARLIMITED WARRANTY