CARE OF YOUR OPENER

LIMIT AND FORCE ADJUSTMENTS:

Weather conditions may cause

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

some minor changes in door

INCREASE TRAVEL

operation requiring some re-

adjustments, particularly during

DOWN

UP

 

 

 

 

 

 

 

the first year of operation.

LIMIT CONTROLS

Pages 27 and 28 refer to the limit

 

(Left Panel)

and force adjustments. Only a

 

 

 

 

 

 

 

screwdriver is required. Follow

 

 

 

 

 

 

 

 

the instructions carefully.

 

 

 

 

 

 

 

 

Repeat the safety reverse test

 

 

 

 

 

 

 

 

(Adjustment Step 3, page 29)

 

 

 

 

 

 

 

 

after any adjustment of limits

 

FORCE CONTROLS

or force.

(Back Panel)

THE REMOTE CONTROL BATTERY

To prevent possible SERIOUS INJURY or DEATH:

•NEVER allow small children near batteries.

•If battery is swallowed, immediately notify doctor. To reduce risk of fire, explosion or chemical burn:

•Replace ONLY with 3V2032 coin batteries.

•DO NOT recharge, disassemble, heat above 100° C (212° F) or incinerate.

The lithium battery should

 

produce power for up

Battery

to 5 years. To replace

positive

battery, use the visor clip

side up (+)

or screwdriver blade to pry

 

open the case as shown.

 

Insert battery positive side

 

up (+).

 

Dispose of old battery properly.

 

MAINTENANCE SCHEDULEEvery Month

•Manually operate door. If it is unbalanced or binding, call a trained door systems technician.

•Check to be sure door opens & closes fully. Adjust limits and/or force if necessary (see pages 27 and 28).

•Repeat the safety reverse test. Make any necessary adjustments (see Adjustment Step 3).

Two Times a Year

•Check chain tension. Disconnect trolley first. Adjust if necessary (see page 11).

Every Year

•Oil door rollers, bearings and hinges. The opener does not require additional lubrication. Do not grease the door tracks.

NOTICE: To comply with FCC and or Industry Canada rules (IC), adjustment or modifications of this receiver and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.

Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

32