PROGRAMMING
NOTICE: If this Security✚® garage door opener is operated with a
Your garage door opener has already been programmed at the factory to operate with your
Below are instructions for programming your opener to operate with additional Security✚® remote controls.
To Add or Reprogram a Hand-held Remote Control
USING THE “LEARN” BUTTON
1.Press and release the “learn” button on the motor unit. The learn indicator light will glow steadily for 30 seconds.
2.Within 30 seconds, press and hold the button on the
3.Release the button when the motor unit lights blink. It has learned the code. If light bulbs are not installed, two clicks will be heard.
|
| To Erase All Codes From |
|
| Motor Unit Memory |
|
| To deactivate any unwanted remote, first erase all |
1 | 2 | codes: |
|
| Press and hold the “learn” |
|
| button on motor unit until the |
|
| learn indicator light goes out |
|
| (approximately 6 seconds). |
|
| All previous codes are now |
|
| erased. Reprogram each |
|
| remote or keyless entry you wish to use. |
*3-Button Remotes
If provided with your
garage door opener, the large button is factory programmed to
operate it. Additional buttons on any Security✚®
remote or
35