10 ATTACHING EXTENSION POLES (IF REQUIRED)
Optional accessory not provided
• Align the extension pole holes with the drive legs.
• Insert the extension poles into the drive leg and fix in place using screws provided.
• Slide the reinforcing brace over the poles and fix in place using the screws provided.
Reinforcing brace must be used. Use extension pole kit part number
Release cable |
|
Rope |
|
Manual Release | Overhand knot |
Warning Label |
|
Release handle |
|
11LEFT / RIGHT HAND INSTALLATION
LEFT
(handing must be changed during limit setting, section 13)
RIGHT (factory default setting)
Inside garage looking out
5